Edwards EST WG4WF-SVMHC Genesis Speaker Strobe (White)Edwards EST WG4WF SVMHC is a white Genesis Speaker Strobe marked "FIRE" suitable for wall or ceiling mounting. Selectable high output 102 123 147 161 cd Operating voltage: Speaker 25 VRMS or 70 VRMS, switch selectable Strobe 24 VDC, 24 VFWR nominal Compatible strobe synchronization sources: E NAC, EG1M RM, EBPS6A, EBPS10A, E FSC 3, 5, and 10 zone, E FSA64, E FSA250 For surface mounting in outdoor or wet applications, appliances must be mounted to an

Class “A”

For flush mounting a 4-inch standard North American square box with single gang plaster cover should be used

New Detector Base needed

It provides a clear remote visual alarm indication where the duct detector isn’t readily visible

Isolators power-up in isolation mode and are directed to connect by the FACU

humidity other conditions that normally interfere with sensor operation

Construction: Weatherproof box with pre-installed perimeter gasket

The Simplex 4100-7158 Master Controller CPU Card — with Ethernet Connection Upgrade Kit (door assembly with user interface not included) for: 4100U with or without operator interface

Candela is field-selectable at 15

Normally if the FACP detects a short on the SLC loop

or 3-CAB5B (Semi-flush mounting) required network Controllers 4-NET-XX series

Inner and outer doors for four position wallboxes