BSI-209 Finish-Cure™ Epoxy 4.5ozFINISH CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH CURE should be heated to a temperature above 85 degrees F or applying light weight

the three or four-letter reporting marks indicated the cars’ intended service and corresponding equipment

55” / 192mm

Scaled from prototype manufacturer’s drawings and field measurements

It can also be used as a small station

Detailed Uce-type Cement Silo Car

Art supplied by ATSF experts

This starter set comes with a locomotive and tender and two passenger cars

Poorly filtered DC

Uses actual PIKO A-Track sections

These locomotives were developed for service where higher horsepower and faster service were preferable

60' Pullman-Standard Flatcar - Ready to Run -- Trailer-Train OTTX #90112 (Farm machinery

UV- and weather-resistant polycarbonate plastic material